Apache Power TS 36V / 250W

Engine
is installed instead of the center of the wheel. The engine has an integrated control unit, a torque sensor (pedal force) and a PAS sensor.
Motor cables are provided with connectors for connecting the speed sensor (on the rear wheel), the battery and the display. A 42-dong converter is installed on the motor.

Nominal engine power is 250W. Thanks to the integrated torque sensor, the engine responds to pedaling power and regulates its performance accordingly. If you push with more force (uphill), the engine helps you more. If you use less force (flat), the engine is less helpful. The result is significantly lower power consumption than for motors with a pedal speed sensor.

Battery
is made of high-quality Li-Ion (lithium-ion) cells from Samsung. The battery weight is only 2.8 kg. Battery output voltage is 36V and maximum discharge current 15A (shock to 18Ah). We offer a choice of battery capacity up to 522Wh (14.5 Ah) for up to 130 km. We recommend placing the battery on the main frame tube of the wheel (optionally also on the wheel carrier). The control unit is part of an electric motor.

Multifunction display
with a separate driver. It can change the 5-level assistance mode (OFF-ECO-TOUR-SPEED-TURBO). The display is equipped with a battery status indicator. In case of unfavorable lighting conditions, the backlight of the display can be activated.

In addition, it also offers a cycle engine with an instantaneous and average speed indicator, distance traveled (trip / total) and driving time.

Accessories
Travel charger 42V / 2A (charging time 4-6 hours depending on battery capacity)
Transmitter with cover
Right and left handle + bolts
Speed ​​sensor + magnet
Installation material

Optional accessories
The standard carrier is designed for 26-28 "wheels. If you wish to carry a smaller wheel (20-24"), please include it in the note at the final check of the order.

Weight
The weight of the electrode is determined by its particular configuration. It moves from 7.5 kg with a 10.4-Ah frame battery pack to 9.1 kg with a 14.5-Ah carrier battery pack. Weight is given including all accessories such as crank, carrier, interconnecting cables, etc. The weight of the charger is 0.55 kg.

Important!
For the successful installation of the center engine on the bicycle frame, it is important that there is enough space in the tread area for the engine itself, especially towards the rear frame construction.
The center motor requires clearance at a distance of X = 65 mm from the axis of the treadmill center at the level of the center socket edge. (see picture)
The rear structure of some frames is too deflected to the side, and the engine body rests on it before the center mufh. In such a case, the rear construction pipe must be deformed so that the motor rests against the edge of the central muffle.

Install the set on your bicycle
professional and express within 2 days - only for 1490 CZK incl. VAT including warranty.
Available on ekolo.cz

TS250 ELECTRICAL INSTRUCTIONS (PDF)

10.4Ah - 16Ah Frame Holder Template (PDF)

17.4Ah - 19.2Ah Frame Template (PDF)