MONDRAKER Zendit RR
Premium full-carbon enduro eMTB – Mondraker’s flagship model for 2027. Its newly developed frame, featuring an updated Zero Suspension system, a powerful Avinox M2S motor, and modern Forward Geometry, ranks it among the best e-enduro bikes on the market.
EAN: 8435803023635, 8435803023673
Description
Avinox M2S
up to 150 Nm
800 Wh
12 speeds
MX - 27.5"/29"
170 / 165 mm
New Sealed Bearings
The ZENDIT model incorporates all the expertise of the MFR DH development team and features the same pivot system as the new and proven Summum DH frame.
The use of Enduro Max bearings in a uniform size makes maintenance easier, and two additional rubber seals extend the bearings’ service life.
STEALTH AIR CARBON – THE NEXT EVOLUTION
The ZENDIT frame was designed to accommodate the most advanced motor system on the market.
It is highly advanced in terms of both design and manufacturing. For the first time, 6-axis CNC machines are used for drilling and finishing the frame instead of manual finishing.
SUSPENSION KINEMATICS
The suspension kinematics of the ZERO model have been completely redesigned to match the performance capabilities of the Avinox M2S motor. The suspension provides greater support and a more responsive feel, ensuring that the increased power is fully transferred to the track.
PROPORTIONS MATTER
The ZENDIT model features rear fork lengths that are proportional to the size. Sizes S, M, and M/L all have the same rear fork length of 450 mm, while sizes L and XL are 5 mm longer, at 455 mm. Thanks to a slight adjustment in the placement of the joints across all sizes, the same lever ratio is achieved on all models. So no matter what size you need, you’ll get the same riding characteristics.
Flip-chip
The lower flip-chip is designed for use with 29" wheels, extending the chainstay by 7 mm. Key geometric angles, bottom bracket height, and suspension kinematics remain completely unchanged.
MONDRAKER Zendit RR 2027 – The Ultimate Next-Generation E-Enduro
The MONDRAKER Zendit RR 2027 is a top-of-the-line enduro e-bike designed as the brand’s flagship model for the most demanding terrain. It’s built from the ground up around the new-generation Avinox M2S drive system, a Stealth Air carbon frame, and extremely capable race geometry. The result is an e-bike designed for aggressive riding in the mountains, bike parks, and technical descents, where stability, power, and control are key.
Avinox M2S Drive – Brutal Power Without Compromise
At the heart of the bike is the new Avinox M2S system, one of the most powerful e-MTB drives available today. It delivers extreme torque of up to 150 Nm and a high level of assistance, allowing you to tackle even very steep and technical climbs with minimal effort.
The motor is integrated directly into the frame and paired with an 800 Wh battery, which provides enough power for all-day enduro riding in the mountains and demanding trail days.
Carbon Frame and ZERO Suspension
The Zendit RR is built on a lightweight yet extremely stiff Stealth Air carbon frame with modern enduro geometry:
- 170 mm travel up front / 165 mm in the rear
- ZERO Suspension system
- mullet wheel configuration (29" / 27.5")
- optimized Forward Geometry for stability at high speeds
The ZERO system is designed to minimize energy loss while pedaling while providing responsive handling on the trail. This keeps the bike efficient on climbs and highly capable on descents.
Brakes for Extreme Downhills
Braking performance is handled by powerful SRAM Maven Base four-piston brakes, designed for heavy-duty e-MTB use. They offer high stability, resistance to overheating, and confidence even on long mountain descents.
Riding Character – Stability and Speed
The Zendit RR is designed as a pure-bred enduro bike for fast and aggressive riding. The long wheelbase, Forward Geometry, and mullet setup give the bike extreme stability at high speeds, while the modern suspension keeps the bike responsive even on rough trails.
This is a bike that excels at:
- fast descents
- technical enduro trails
- bike parks and big drops
- aggressive riding style
This model is ideal for experienced riders who want:
- maximum power and control off-road
- a top-of-the-line, next-generation engine
- long range without compromise
- a bike with a race-ready enduro character
The Mondraker Zendit RR 2027 is an extremely capable e-enduro bike that pushes the boundaries of modern e-bikes. It combines a carbon frame, the top-of-the-line Avinox M2S drive system, and race-ready Fox and SRAM components into a single package. The result is a machine for riders who want maximum performance, stability, and control on the most demanding terrain without any compromises.
E-bike range calculator
Flat
Medium
Hills
The e-bike range is approximately
*Factors affecting total range include technical condition of the e-bike, battery age, ambient temperature, headwind, and riding technique
Carbon fibre
E-bikes that use carbon fiber are a common choice among amateur and professional cyclists. Previously, it was mainly road e-bikes, but today you can enjoy the benefits of carbon on almost any type of e-bike. It remains an ideal choice among lovers of fast driving and off-road driving. The main advantage of e-bikes with a carbon frame is exceptional shock and vibration damping, they resist corrosion and wear very well and, compared to other materials, they excel in their low weight.
Avinox M2S
A high-performance motor with 130 Nm of torque (150 Nm in Boost mode), a peak power output of 1500 W (with the FP700 battery; 1,300 W with other batteries; or 1,500 W in Boost mode with the RS800) and a lightweight design (2.59 kg). The second generation features flat-wire winding for higher efficiency, quiet helical gearing, and Dual Gear Engagement technology, which eliminates rattling during descents without assistance. Internal resistance has been reduced by 41%, ensuring a natural ride even with a depleted battery. Integrated sensors enable adaptive power control based on cadence and riding conditions. Intelligent electronics ensure lightning-fast pedal response and smooth power delivery that will support you even on the most demanding terrain.
Avinox FS800 Battery
The Avinox Drive System battery with 800 Wh capacity offers long range and plenty of power. It is lightweight (3.74 kg), compact, and protected to IP56 standard. An intelligent health management system ensures long lifespan, retaining up to 80% capacity after 500 cycles. GaN fast charging recharges the 800 Wh battery to 75% in just 1.5 hours.
Display Avinox DP100
The display is integrated into the frame of the e-bike. It has a 2" OLED touch panel with a resolution of 326 ppi and a brightness of up to 800 nits, which automatically adjusts to the ambient lighting. It features GPS sensors, a gyroscope, a barometer and support for Bluetooth 5.1, ANT+ and LTE-Cat.1. It allows you to track your route, speed, cadence and performance with 8 GB of internal memory and synchronisation via the app. Control is provided by one or two wireless controllers on the handlebars – the left one for setting the level of assistance and the right one for scrolling through the display (the right controller is only available on selected models). The USB-C port supports fast charging with a power output of up to 65 W.
Mondraker Lifetime Warranty
Mondraker offers first owners a lifetime extended warranty on the frame (including the main frame and rear triangle on full-suspension models). The paint warranty is standardly set at 2 years.
A key condition is online registration within 3 months (90 days) of purchase. If registration is not completed, only the statutory warranty period of the respective country applies (2–3 years, depending on the country). To claim the warranty, it is necessary to have regular annual warranty inspections performed at an authorized service center, which also handles any warranty claims.
The extended warranty is non-transferable and does not cover normal wear and tear of consumable parts, damage from accidents, improper use, modifications, commercial use, or the cost of service labor.
Mondraker is the undisputed leader in e-MTBs, winning you over with its revolutionary Forward Geometry for perfect stability and its legendary Zero Suspension System. This Spanish brand combines aggressive design with powerful motors for even the steepest climbs and descents. Whether you choose a lightweight trail bike or an uncompromising enduro bike, with Mondraker you’ll get maximum confidence on the trail, excellent handling, and pure riding enjoyment.
The exclusive distributor of Mondraker e-bikes, accessories, and spare parts is SNOW-HOW ČR s.r.o.
Contact: SNOW-HOW ČR s.r.o., Zděbradská 56, Jažlovice, 251 01 Říčany, email: eshop@skibikecentrum.cz, phone: +420 323 627 611, website: www.mondraker.cz / www.skibikecentrum.cz
Parameters
General
| Model year | 2027 |
| Weight including battery | 22,8 kg |
| Colour | Brown, Grey |
| Frame size | Frame L, Frame S, Frame XL, Frame M, Frame M/L |
Motor
| Centre engine | Yes |
| Engine manufacturer | Avinox |
| Engine type | Avinox M2S |
| Display | Avinox DP100 with left and right controller |
Battery
| Battery capacity | 800 - 899 Wh |
| Precise capacity | 800 Wh |
Transmission
| Sort by | Sram AXS POD controller |
| Shifter | Sram S1000 Eagle AXS Transmission 12 speed |
| Cassette | SRAM XS 1270 Eagle T-Type, 10-52t |
Components
| Extender | Onoff S6 30mm 0º, 31.8 mm |
| Saddlebag | Onoff Pija dropper, 31.6 mm, S: 140-115mm (388-235mm), M: 160-135mm (428-255mm), ML: 180-155mm (468-275mm), L: 210-185mm (528-305mm), XL: 210-185mm (528-305mm) |
| Saddle | Ergon SM10 E-Mountain |
| Grips | Onoff Desert Pro, lock-on, 135 mm |
| Coats | Maxxis Assegai 29x2.50, Maxxis Minion DHR II 27.5"x2.4", 3C MaxxTerra, EXO+ |
| Řídítka | Onoff S9 1.0 7050 Carbon, 31.8 mm, height: 25 mm, width: 800 mm, 8° backsweep, 5° upsweep, L/XL: 38 mm height |
| Rims and hubs | DT Swiss Hybrid H 1900 SPLINE 30 mm, Straightpull, DT Swiss 370, Boost 15x110mm/12x148mm, 6 bolts |
Brakes
| Front brakes | Sram Maven Base, hydraulic, rotor 200 mm |
| Rear brakes | Sram Maven Base, hydraulic, rotor 200 mm |
Suspension
| Front fork | Fox 38 Factory Kashima, GRIP X2, 29" |
| Fork travel | 170 mm |
| Shocks | Fox Float X Factory |
| Rear travel | 165 mm |
| Shock dimensions | 205 × 65 mm |
Video
Questions
Please fill in your contact details, enter your inquiry, and we'll get back to you as soon as possible.