AMFLOW PX carbon PRO
The brand new Avinox M2S full-power e-bike with up to 1500 W and 150 Nm of torque. With a more aggressive, trail / enduro focus. Emphasizes high performance, low weight and excellent integration. Thanks to its ultra-lightweight carbon fibre frame, it weighs just 20.6 kg.
Description
Avinox M2S
up to 150 Nm
700 Wh
12 speeds
29"
160/150 mm
Smart suspension system
The suspension system uses an advanced four-pin suspension that dramatically increases pedaling efficiency. The bike is also highly flexible: thanks to integrated flip chips, you can easily use both 29" and 27.5" rear wheels without changing the frame geometry and centre of gravity.
Lightning charging
The system supports GaN 3x fast charging (12A/508W), which will charge the battery from 0% to 75% in just approximately 96 minutes. The Intelligent Battery Health function actively monitors and manages the battery's health to extend its life: it guarantees 80% of its original capacity is maintained after 500 full cycles.
Smart offline navigation
The Avinox Ride app is compatible with third-party route imports and can convert historical routes to route files (GPX/FIT/TCX formats), allowing one-click synchronization and management of ride data. Once the control display receives the data, it can navigate independently without a phone connection and provide real-time directions and route deviation alerts.
AMFLOW PX carbon PRO - the new king of lightweight full performance eMTBs for 2026
The all-new AMFLOWl PX Carbon Pro - a full-performance e-bike (eMTB) that builds on the lighter PL series, but this time with a much more aggressive trail / enduro focus. Combined with the Avinox drivetrain, it delivers extreme performance while maintaining low weight, excellent integration and unprecedented geometry adjustability.
Extremely lightweight yet brutally powerful construction
The PX Carbon Pro's main asset is its combination of light weight and high performance. The all-carbon frame weighs approximately 2.4 kg (size M) and the total weight of the e-bike is around 20-21.4 kg. Specifically, the Pro version in tubeless setup is approximately 20.6 kg for the M size and 21.4 kg for the L size. This makes the e-bike behave more like a lightweight trail bike than a typical heavy full-power eMTB.
At the heart of the bike is DJI's Avinox M2S motor. It offers up to 130 Nm of continuous torque and even 150 Nm in Boost mode. Peak power reaches around 1500 watts (with the possibility of short-term higher peaks). The motor is extremely quiet (approx. 45 dBA), responds lightning fast and has a very natural operation. Five support modes are available, including a clever adaptive Auto mode. Boost mode is ideal for steep technical climbs where it can literally "shoot" the bike forward.
High energy density battery
The integrated battery has a capacity of 700 Wh and features a high energy density of 220 Wh/kg (battery weight approx. 3.18 kg). It supports fast charging - 0-80% is significantly faster thanks to the 508 W charger. Actual off-road range will of course depend on the route profile, rider weight and selected support mode.
On PX models, the battery is permanently integrated and replacement requires removal of the engine. On the larger XL and XXL sizes, an external RS600 battery can be attached.
Suspension and kinematics at the highest level
The Amflow PX Carbon Pro has 160 mm of travel at the front and 150 mm at the rear. It uses a sophisticated four-pin suspension system that has been specially tuned for maximum sensitivity to minor bumps, as well as good load support. The top Pro version is fitted with a premium Fox 36 Factory GRIP X2 fork and Fox Float X Factory shock.
One of the biggest draws of the PX is the extreme geometry variability. In total, it offers up to 40 different configurations:
Head angle: base value 64.2°. With inserts in the head assembly, it can be changed by ±1° in 0.5° increments - from steeper for better handling to flatter for maximum stability on descents.
Centre height: Two positions.
Chainstay length: Four positions ranging from 438-451 mm thanks to flip-chips.
Wheels: Comes standard as a mullet (29" front / 27.5" rear) with Schwalbe Magic Mary (front) and Albert (rear) tires in Gravity Pro Radial. Fully compatible with two 29" wheels.
Example geometry for size L: effective seat angle approx. 78°, reach 478 mm. The bike is available in sizes M to XXL (without size S).
Thanks to this flexibility, the rider can adapt the PX to suit his style - from technical trails to all-mountain to fast enduro descents.
Premium fitment of the Carbon Pro version
SRAM X0 Eagle Transmission wireless drivetrain with Amflow SL cranks (38T, 155/160 mm lengths).
Wheels: Amflow XMC-30 carbon rims (30mm inner width), Sapim spokes and high-backlash hubs.
Magura Gustav Pro 4-pistonbrakes with 203/203 mm discs.
Cockpit: Amflow carbon enduro handlebars (800 mm, 40 mm rise), short stem, adjustable seatpost and saddle with titanium rails.
The bike features an integrated 2" touchscreen display, connection to the Avinox Ride app (motor settings, heart rate support, offline GPX/FIT/TCX navigation) and wireless light control. The Pro version offers free IoT features including GPS tracking, anti-theft and OTA software updates.
Early reviews praise the lively and natural feel of the climb, the sure yet playful descent, the quiet engine operation and the clean, premium design. The combination of high performance with low weight makes the Amflow PX Carbon Pro an extremely versatile and fun bike that doesn't limit itself to classic "heavy" eMTB behavior.
This makes the Amflow PX Carbon Pro an ideal choice for the discerning rider looking for a high-performance trail/enduro e-bike capable of tackling technical terrain and fast descents without sacrificing handling and riding enjoyment.
E-bike range calculator
Flat
Medium
Hills
The e-bike range is approximately
*Factors affecting total range include technical condition of the e-bike, battery age, ambient temperature, headwind, and riding technique
Avinox M2S
A high-performance motor with 130 Nm of torque (150 Nm in Boost mode), a peak power output of 1500 W, and a lightweight design (2.59 kg). The second generation features flat-wire winding for higher efficiency, quiet helical gearing, and Dual Gear Engagement technology, which eliminates rattling during descents without assistance. Internal resistance has been reduced by 41%, ensuring a natural ride even with a depleted battery. Integrated sensors enable adaptive power control based on cadence and riding conditions. Intelligent electronics ensure lightning-fast pedal response and smooth power delivery that will support you even on the most demanding terrain.
Avinox FP700 Battery
The Avinox FP700 battery, with a capacity of 700 Wh, utilizes revolutionary 4680 automotive cells for maximum current handling. It is very lightweight (3.18 kg), IP56-rated, and enables the M2S motor to achieve a full continuous power output of 1500 W. Intelligent health management guarantees 80% capacity even after 500 cycles. Powerful GaN fast charging replenishes energy to 80% in a record 1 hour and 16 minutes.
Display Avinox DP100
The display is integrated into the frame of the e-bike. It has a 2" OLED touch panel with a resolution of 326 ppi and a brightness of up to 800 nits, which automatically adjusts to the ambient lighting. It features GPS sensors, a gyroscope, a barometer and support for Bluetooth 5.1, ANT+ and LTE-Cat.1. It allows you to track your route, speed, cadence and performance with 8 GB of internal memory and synchronisation via the app. Control is provided by one or two wireless controllers on the handlebars – the left one for setting the level of assistance and the right one for scrolling through the display (the right controller is only available on selected models). The USB-C port supports fast charging with a power output of up to 65 W.
AMFLOW is an innovative e-MTB brand that combines technological know-how with a passion for mountain biking, created under the wing of DJI, which gives it technological credibility and access to advanced motor and battery solutions. It builds on the philosophy of "the motor as the heart of the bike" and focuses on combining low weight, high performance, and a natural riding feel. Thanks to DJI Avinox technology, it offers lightweight, powerful, and technically advanced e-bikes designed for riders who want real performance in the field, not just assistance.
Contact: KROSS S.A., Leszno 46, 06-300 Przasnysz, Poland, e-mail: kross@kross.pl, phone: +48 29 752 11 00, web: www.kross-europe.eu
Parameters
General
| Brand | Amflow |
| Frame size | Frame L, Frame XXL, Frame XL, Frame M |
| Colour | Grey |
Motor
| Engine manufacturer | Avinox |
| Engine type | Avinox M2S |
| Torque | 130 Nm (Boost 150 Nm) |
| Centre engine | Yes |
| Display | Avinox DP100 with left and right controller |
Battery
| Charger | Avinox Charger 12 A |
| Battery capacity | 700 - 799 Wh |
| Precise capacity | 700 Wh |
Transmission
| Number of gears | 1x12 |
| Shifter | Sram X0 Eagle Transmission |
| Cassette | Sram XS-1295 Eagle T-Type 10-52t |
| Sort by | Sram AXS Pod Controller Rocker Paddle Right |
Components
| Grips | Amflow Enduro Grips |
| Front hub | Alloy, 2 sealed bearings, 15×110mm thru-axle, 28H, J-bend, 6-bolt |
| Extender | Amflow Mountain Bike Split Stem, Length: 35mm, Clamping Diameter: 35mm |
| Coats | Schwalbe Magic Mary Radial, 29×2.5, Gravity Pro, Ultra Soft, tubeless ready, Schwalbe Albert, Radial, 27.5×2.5, Gravity Pro, Addix Soft, tubeless ready |
| Rear hub | Alloy, 4 sealed bearings, 12×148mm thru-axle, 32H, J-bend, 6-bolt, 6 pawls 60T, XD |
| Handlebars | Amflow Enduro Carbon Handlebar, 40mm Rise, 800mm Width, 35mm Diameter, 5-degree upsweep, 9-degree backsweep |
| Racks | Carbon, 29″, 30mm inner width, 28H, tubeless ready, Carbon, 27.5″, 30mm inner width, 32H, tubeless ready |
| Saddle | Amflow Mountain Saddle Titanium |
| Saddlebag | Amflow Dropper Post Shim, M/L Frame: 190mm, XL Frame: 210mm, XXL Frame: 230mm |
Brakes
| Front brakes | MAGURA Gustav Pro, hydraulic, rotor 203 mm |
| Rear brakes | MAGURA Gustav Pro, hydraulic, rotor 203 mm |
Suspension
| Front fork | FOX 36 Factory |
| Fork travel | 160 mm |
| Shocks | Fox Float X Factory |
| Rear travel | 150 mm |
| Shock dimensions | 210 × 55 mm |
Questions
frontstore.product.questions_desc