Tuning of e-bike PearTune MSO 3.0 Normal Avinox DJI M1

PearTune MSO 3.0 Normal Avinox DJI M1 - unlock the full potential of your e-bike

PearTune MSO 3.0 Normal for Avinox DJI M1 is a basic and highly reliable version of the tuning chip from Czech manufacturer PearControl. This chip permanently removes the factory 25 km/h speed limit of the Avinox DJI M1 motor assist. Once installed, the tuning is automatically activated every time you turn the bike on - no on/off, no button combinations. Ideal for riders who want a simple, "always ready" solution and full motor performance even at higher speeds.

ACTIVATION: Press the -+-+ buttons , start from TURBO assist mode with the MINUS button.

The device is fully compatible in combination with the Avinox DJI M1 engine and all displays available on the market for these engines. Also fully compatible with the latest software update.

Installation is done directly in the engine compartment using waterproof connectors for connection to the engine, display and speed sensor. Calibration and adaptation to the e-bike system is carried out fully automatically without user intervention during the first switching on or off of the chip.

PearTune MSO 3.0 Normal is a tuning chip from Czech manufacturer PearControl that completely removes the 25 km/h assist limit on Avinox DJI M1 motors. Enjoy smooth motor support even at higher speeds - ideal for sport riding, long routes and challenging terrain.

Display values: realistic data up to 22.5km/h, then the real speed is shown in the last two digits of the display. e.g.: 23.3 corresponds to 33 km/h, 24.2 corresponds to 42 km/h

Key features (Normal version)

• Switchable tuning - can be activated or deactivated while driving using the buttons on the controller (usually a + / - combination). When deactivated, the bike operates fully in original mode with a 25 km/h limit.
• Correct data display - shows real speed up to approx. 22.5 km/h. Above this limit, coding is used (last two digits), e.g. 23.5 = 35 km/h etc. The correct distance, average speed and other values remain.
• Full compatibility - with the original Avinox Ride app, all available displays and speed sensors. Also supports the latest system software updates.
• Plug & Play installation - directly in the engine compartment using the original waterproof connectors (to engine, display and speed sensor). Installation takes approximately 15-20 minutes, calibration takes place automatically on first power up.
• Compact design - very small size, fits all Avinox M1 frames and models.

Technical information

Version: PearTune MSO 3.0 Normal Avinox DJI M1
Motor: Avinox DJI M1
Installation: simple plug & play directly into the motor using the original waterproof connectors (to motor, display and speed sensor). It takes approximately 15-20 minutes to connect the sensor to the sensor and to the remote sensor. Automatic calibration after the first power-up.
Warranty: Lifetime from PearControl
Dimensions: Extremely compact and lightweight chip, almost invisible after installation

The PearTune MSO 3.0 Normal is a great choice for owners of electric bikes with the Avinox DJI M1 engine who are looking for a more affordable, simple and reliable solution with no setup required. The chip does not interfere with the normal operation of the bike and fully works with all original sensors.

Note: The tuning is designed primarily for use on private land, off-road tracks and off public roads. Legal limits of 25 km/h apply on public roads.