Tuning of e-bike PearTune MSO 3.0 Still ON Avinox DJI M1

PearTune MSO 3.0 Still ON Avinox DJI M1 - unlock the full potential of your e-bike

PearTune MSO 3.0 Still ON for Avinox DJI M1 is a basic and highly reliable version of the tuning chip from Czech manufacturer PearControl. This chip permanently removes the factory 25 km/h speed limit of the Avinox DJI M1 motor assist. Once installed, the tuning is automatically activated every time the bike is turned on - no on/off, no button combinations. Ideal for riders who want a simple, "always ready" solution and full motor performance even at higher speeds.

ACTIVATION: Press the -+-+ buttons , start from TURBO assist mode with the MINUS button.

The device is fully compatible in combination with the Avinox DJI M1 engine and all displays available on the market for these engines. Also fully compatible with the latest software update.

Installation is done directly in the engine compartment using waterproof connectors for connection to the engine, display and speed sensor. Calibration and adaptation to the e-bike system is carried out fully automatically without user intervention during the first switching on or off of the chip.

PearTune MSO 3.0 Still ON is a tuning chip from Czech manufacturer PearControl that completely removes the 25 km/h assist limit on Avinox DJI M1 motors. Enjoy smooth motor support even at higher speeds - ideal for sport riding, long routes and challenging terrains.

Display values: realistic data up to 22.5km/h, then the real speed is shown in the last two digits of the display. e.g.: 23.3 corresponds to 33 km/h, 24.2 corresponds to 42 km/h

Main advantages

Permanent (Still ON) activation - Tuning is active as soon as the bike is switched on, without any control.
Unlimited assistance - The motor provides smooth assistance even above 25 km/h and fully utilizes the potential of the Avinox DJI M1 (up to 120 Nm and 1000 W peak).
Correct data display - Speed, distance and other values are displayed correctly (up to about 22.5 km/h normally, above that the real speed in the last two digits).
Full compatibility - Works with all Avinox DJI M1 displays and supports the Avinox Ride app. Compatible with the latest software updates.

Technical Information

Version: MSO 3.0 Still ON (basic, permanently active)
Motor: Avinox DJI M1
Installation: Simple plug & play directly into the motor using the original waterproof connectors (to motor, display and speed sensor). It takes approximately 15-20 minutes. Automatic calibration after first power-up.
Warranty: Lifetime from PearControl
Dimensions: Extremely compact and lightweight chip, almost invisible after installation

The PearTune MSO 3.0 Still ON is a great choice for owners of electric bikes with the Avinox DJI M1 engine who are looking for a more affordable, simple and reliable solution with no setup required. The chip does not interfere with the normal operation of the bike and fully works with all original sensors.

Note: The tuning is designed primarily for use on private land, off-road trails and off public roads. Legal limits of 25 km/h apply on public roads.