SpeedBox 1.6 for Bosch (Smart System Gen.5 + Rim Magnet)

Tuning chip for your electric bike with Bosch 5th generation motors with Smart System + Rim Magnet. Enjoy riding without limits!

SpeedBox 1.6 for Bosch allows you to deactivate the speed limiter of your e-bike.

If you want to monitor the real values over the entire speed range from your ride, we recommend the SpeedBox 1.6 B.Tuning for Bosch version in the SpeedBox App on your phone screen.

SIMPLIFIED INSTALLATION
No need to search for a suitable Magnet Simulator position

DESIGNED FOR ENGINES:
Performance Line CX - 5th generation
(engine mounted with 2 screws)

How does SpeedBox 1.6 for Bosch work?

In order to activate all SpeedBox functions correctly, it is necessary to enter the menu after switching on the bike and navigate to the circuit data of your bike if you have older firmware in your bike.

The chip is easy to use. The SpeedBox 1.6 chip is activated on the display of the e-bike. Do not activate the tuning while driving! After briefly activating the WALK function (holding the "-" button), the display shows 3.5 km/h (2.2 mph) and from that moment on you can drive at 35 km/h (35 mph). You can change the default speed limit to any limit (up to 99 km/h), but to minimize the risk of error codes, we recommend not to exceed 35 km/h.

You can deactivate the chip function by reactivating the WALK function (holding the "-" button). The display will show 2.5 km/h (1.6 mph) and the 25 km/h speed limit is re-enabled. The e-bike then functions as before the chip was installed. Do not deactivate while riding either!

E-bikes that do not have the WALK function available or active -> in this case you can activate and deactivate the tuning by double switching between the two modes, i.e. by combining the - + - + buttons.

You can set the maximum assist speed by switching the modes from TURBO mode down three levels and then up three levels (eMTB - TOUR+ - ECO - TOUR+ - eMTB - TURBO). The current speed limit is then shown on the display. Switch the maximum assist speed by briefly pressing the WALK button or by turning the wheel 360°. Displaying 2.5 km/h corresponds to 25 km/h, 3.0 corresponds to 30 km/h, 3.5 corresponds to 35 km/h, etc. The last displayed limit is saved after 15 seconds of inactivity.

When you have finished riding, leave the e-bike switched on until the display permanently shows 0.0 km/h. During this phase, the remaining time will be shown on the display. You can then safely switch the bike off and look forward to your next trip.

FEATURES:
Maximum speed: Unlimited (max 35 km/h recommended)
Display:
Real speed: NO
Real distance travelled: after calculation
Activation/deactivation (not to be done while driving):
WALK function
Buttons - + - +
Activation/deactivation indication: YES (3.5/2.5 km/h)

Compatible with:
Performance Line CX engines - 5th generation
Electric bikes that have a magnet on the valve (Bosch Rim Magnet)
With current Bosch software version
View a list of supported software versions

Incompatible with:
Standard Magnet
ABS system
SpeedBox App
Generation 4 engines

Please check the type of your e-bike and the space in the motor before purchasing the product

Installation

Original connectors are used to manufacture the SpeedBox chips to make the installation of the chip really easy and the wiring correct. Detailed instructions and videos are provided to help you master the SpeedBox installation yourself. Disassembly of the tuning chip is as easy as assembly. If you have any problems with the wiring, don't hesitate to contact us.

In case you are going to install the SpeedBox on a brand new bike, you need to ride it at least 10 km before running the chip for the first time.

Important

Connect the male-female connectors in the direction of the lock. Do not turn the connectors while plugging them in!

Caution

Please note that the operation of electric bikes modified in this way on roads may be in contravention of current legislation in some countries. Neither the manufacturer nor the supplier accepts any liability for damage resulting from the use of SpeedBox products. E-bikes equipped with SpeedBox products may not be used on roads, cycle paths or public spaces. E-bikes equipped with SpeedBox products may only be used on your own property, solely at your own risk. Use of SpeedBox products may void your e-bike's warranty.

We recommend the use of additional safety features and protective products to prevent injury.

We recommend that you do not update the firmware of your e-bike. Updating increases the risk of tuning detection.

Turn off automatic updates in the Ebike flow settings.

The warranty does not cover product malfunction caused by engine updates.

We recommend keeping one foot on the pedal when stopping briefly to avoid triggering the odometer.

For longer stops, allow at least a partial odometer count to run.

Do not remove the display to lock the e-bike until the odometer has run.

Activate/deactivate the tuning as a matter of principle while stopped, not while driving.

We recommend that you do not exceed the recommended maximum speed of 35 km/h.