PearTune MSO Tuning e-bike TQ HPR50

PearTune is connected to the e-bike system using compatible and original connectors. MSO does not need to be configured manually. The entire configuration and adaptation to the specific e-bike is done automatically. The MSO is connected between the magnetic speed sensor and the motor unit and between the display and the motor unit. The MSO is powered from the display connector. All data such as current speed, maximum speed, average speed, distance, etc. are displayed correctly.

The MSO can be activated or deactivated at any time during the ride by pressing the +-+- buttons.

The status of the device is indicated by a certain element on the display, so the rider always knows whether the device is active or not. Thanks to the original connectors, the tuning of the e-bike can be uninstalled without any traces and the original Brose diagnostics (highest level) found no traces after removing the device. The only difference is that from the moment of installation you determine the speed of the ride, not your bike. The maximum speed is limited only by the pedaling frequency.

Using

The MSO-TQ-HPR50 can be activated or deactivated at any time by pressing the + + - - - or - - + + or + - - + buttons.

Technical parameters

Dimensions without wiring: 21 x 40 x 12mm

Supply voltage range: 5 - 15 V

Maximum current draw: 100 mA

Maximum power consumption: 1.5W

Weight: approx. 30g

Voltage is below 20 V in all devices and also on I/O pins.