Charging station for electric school ≠ outdoor socket on object!
Why charging station?
The power of each built-in charger is 3A (maximum output voltage 42V), these are branded chargers certified for an electric school. The peak take-off with simultaneous charging of 4 electric wheels is 12A, PowerBox does not need any special protection.
Charging a 400Wh battery from 10% to 80% will take up to 2 hours with PowerBox (but most customers will appreciate the battery even a few dozen percent).
The electricity consumption for charging electrics is negligible and the price of the equipment is much lower than the electric car charger, so there is no payment system for the use of electric wheel charging at PowerBox.
The PowerBox is designed for outdoor installation , can be permanently placed on the facade of an object or on a post with a 230V supply. But it can also be set in the interior (reception of the company).
The PowerBox is fitted with separate fuses in case of a short circuit or other problem. This equipment is certified by the Electrotechnical Testing Institute.
The Power Box contains 4 status LEDs for each charging slot that informs you of the status of the charger (not connected / charged / charged).
PowerBox on demand is equipped with a remote management system via a mobile phone. The operator has the ability to switch off remotely - enabling the PowerBox charging station from anywhere via a mobile application (for Android, iPhone) can accurately set the switch-on and shutdown times in real time, and have a realistic overview of current and total power consumption in real time. For proper functioning of this module, a functional WiFi connection is required at the PowerBox installation site.
Unfortunately, the electric cars do not have a charging standard for the connector (such as MicroUSB or USB-C mobile phones). In the world there are more than 40 different types of charging connectors for an electric school.
For PowerBox you order interconnection charging cables for the most common brands / types of electro-battery batteries operated on the Czech market * (LeaderFox, Apache, Lectron, Agogs, Giant and others). If there is more demand for some type of charging, you can easily buy only a particular cable with the correct connector.
* Because of the special communication interface, the PowerBox is not designed to charge Bosch center-mounted electric motors in its basic configuration. Charging for Bosch (special socket + cable) can be ordered at a surcharge of 4500 CZK.
Customers (clients, employees) may have their own cable to connect their type of electric to your PowerBox. For other customers, the cable may be temporarily rented or borrowed (at a restaurant, reception desk) typically against a refundable financial deposit.
The price of a separate cable with an adequate plug according to the type of a particular electric school is CZK 490 incl. VAT.
We offer charging cables for these and other brands of electrics:
Delivery time : within 2 weeks of order. Implementation of the installation - by personal agreement.
Installation : on the facade / wall: 4x screw or on a pole with a load capacity of 10 kg. (not included)
Possibility of sticking: resistant PVC foil 25 * 35 cm (not included, realization approx. 600 CZK without VAT).
The only known comparable product on the market in the EU to our PowerBox solution is E-charging station POINT from the Austrian manufacturer BikeEnergy, at 4.985, - EUR (about CZK 130,000, 5x more expensive). This solution does not provide charging cables / adapters for most electric motors operating in the Czech Republic.